Description
Everbuild EVBCYN20 Industrial Superglue General Purpose 20g
The Everbuild Industrial Superglue is a medium viscosity formula that can fill gaps to 0.1mm.
This Everbuild product is a very strong industrial superglue that is ideal for use on perfect fit surfaces where fast setting is required.
It bonds non-porous surfaces like^ plastics^ metals^ glass^ PVCu^ rubber and EPDM and has a viscosity at 25° c of 100cps and a setting time of 5 to 15 seconds so you will get the job in hand done quickly and with a professional finish.
20gm bottle.
Product Description
EVERBUILD INDUSTRIAL SUPERGLUE GP is a medium viscosity flash setting industrial adhesive based on advanced cyanoacrylate technology.
Benefits
Flash setting formulation, bonds to most non porous surfaces in seconds.
Fills gaps up to 0.1mm
Single component adhesive
100% solvent free
Economical in use
Single component adhesive
100% solvent free
Economical in use
Limitations
Ensure surfaces are degreased prior to bonding.
Ensure surfaces are close fitting. This adhesive will not bridge gaps.
Do not use in applications involving constant water immersion.
Do not use on bitumen or tar leaching products.
As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.
Do not use in applications involving constant water immersion.
Do not use on bitumen or tar leaching products.
As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.
Application
The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of 50% +.
Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds or as indicated below. Cure speed is rapid so exercise care when aligning.
Specific Data
Form Clear liquid.
Viscosity 100-120 poise
Base Ethyl Cyanoacrylate
Solids 100% Active
Viscosity 100-120 poise
Base Ethyl Cyanoacrylate
Solids 100% Active
Specific Gravity 1.05
Flash Point >85 Degrees C
Tensile Strength 28-32Nmm2 (steel-steel ASTM D2095)
Shear Strength 15-20Nmm2 (steel-steel ASTM D1002)
Impact Strength 1.8-2.0Nmm2 (steel-steel ASTM 950)
Colour Clear
Refractive index 1.46 (cured adhesive)
Hardness 82 (Rockwell cured adhesive)
Specific resistance 8 x 1012 OHM/cm (cured adhesive)
Dielectric Const. 3.44 @ 1MHZ (cured adhesive)
Softening Point 150OC
Working temps -60 to +80oC
Setting times
Flash Point >85 Degrees C
Tensile Strength 28-32Nmm2 (steel-steel ASTM D2095)
Shear Strength 15-20Nmm2 (steel-steel ASTM D1002)
Impact Strength 1.8-2.0Nmm2 (steel-steel ASTM 950)
Colour Clear
Refractive index 1.46 (cured adhesive)
Hardness 82 (Rockwell cured adhesive)
Specific resistance 8 x 1012 OHM/cm (cured adhesive)
Dielectric Const. 3.44 @ 1MHZ (cured adhesive)
Softening Point 150OC
Working temps -60 to +80oC
Setting times
5-60 seconds (plastic to plastic)
2-20 seconds (rubber to rubber)
10-60 seconds (degreased metal to metal)
Toxicity Non toxic
2-20 seconds (rubber to rubber)
10-60 seconds (degreased metal to metal)
Toxicity Non toxic
Health & Safety
Contact us Mease Valley for MSDS for full list of hazards.
Warning
Please keep all packaging away from children to avoid suffocation and as with any product please keep out the reach of children.
Contact Us
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.